How To Clean Lazer On 5 Disc Dvd Player

Article ID : 00025216 / Last Modified : 10/18/2021

There is an mistake message displayed and discs will no longer play.

IMPORTANT: This article applies only to specific products and/or operating systems. Bank check Applicable Products and Categories for details.

If you feel difficulty playing a disc and yous receive any of the following error letters, at that place may be an incorrect setting or there may be a problem with the disc that you lot are trying to play.

NO DISC
DISC Fault
INSERT DISC

Follow these steps to try to resolve this issue:

IMPORTANT: Not all CD/DVD players are supplied with the same functions and/or features. To verify model-specific information on whatsoever of these steps, refer to the instructions supplied with the product. Manuals are posted on your model back up page.

If in that location is a HOLD switch or function bachelor for the histrion, make sure that the switch or the part is prepare OFF.
Verify the disc that you are trying to play is supported past the player.
NOTE: There are some disc players that do non support VCD or DVD discs, too equally not supporting CD-R or CD-RW discs created by a CD burner. For information regarding disc compatibility with your unit, refer to the operating instructions.
Endeavour playing a couple of different commercially-produced discs.
Note: If more than one commercially-produced disc does not play, verify whether the discs are extended-length discs. Some players are non able to play discs where the recording exceeds the standard 74 minutes. If the recording of the disc is longer than 74 minutes, it is possible that some of the specifications of that disc were compromised and therefore, the CD thespian will not recognize that disc.
Verify that the disc is inserted correctly, with the playback side of the disc facing downwards in the disc tray.
If the disc is dirty with fingerprints or smudges, or if the disc is scratched or broken, the player may not recognize the disc, clean the disc using a soft, dry cloth.
Reset the player back to the factory-default specifications.
If no discs will play, remove any discs from the actor and get out the player powered on with the CD tray opened (if possible) for approximately one hour to resolve the possibility of moisture condensation within the thespian.

The troubleshooting steps listed in a higher place should resolve your issue. If you accept completed all of the steps and the event is not resolved, the laser pickup may be dingy.

Important: Sony does not recommend the use of over-the-counter CD/DVD player lens cleaners.

We recommend bringing the unit of measurement in to be cleaned by a mill-trained technician. Go to Product Repair.

Troubleshooting and additional data:

An mistake code or bulletin appears when trying to play a DVD or Blu-ray Disc media.
How to watch a Blu-ray Disc moving-picture show that is mastered in 4K on a Sony 4K TV.
How to troubleshoot if a meaty disc (CD) volition not play.
The tray of the Blu-ray Disc actor does non open or eject the inserted disc.